Application guide
Excavation & Digging
Excavation removes material to form foundations, trenches and working levels. Productive attachment selection starts with the required excavation shape, ground conditions and the way spoil will be handled.
Choose the working method
- Ground and cut geometry
- Separate bulk excavation from narrow trenching and precise work beside existing structures.
- Spoil handling
- Choose a bucket that can release the material cleanly and fit the loading or placement method.
- Hard layers
- Determine whether cutting, ripping or breaking is needed rather than forcing a general bucket through unsuitable ground.
Job planning sequence
- Confirm the excavation requirements and identify services and ground constraints.
- Select bucket width, geometry and wear construction from the normal material.
- Plan loading and spoil placement so the machine can work without unnecessary travel.
Selection mistakes to avoid
- An oversized bucket can increase resistance and payload without increasing useful output.
- A bucket suitable for dry soil may be inappropriate for dense wet material.
Define the specification
Describe the material, required result, access, cycle frequency and working radius before comparing tools. Record the exact carrier and mounting interface, attachment mass, available auxiliary hydraulics and required control functions.
Agree how the complete arrangement will be installed, maintained and transported. Compare normal production work and the most demanding expected conditions rather than relying on a single catalogue capacity.
Compare relevant guides
The attachment guides below explain individual tool families. Use the carrier guides to check the machine side of the combination and the category guides to explore alternative working methods.