Compare augers, their applications, mounting requirements and carrier compatibility.
Explore guide →Casing rotators grip and rotate temporary or permanent casing into or out of the ground during full-casing foundation work. They are specialist systems used where bore stability, groundwater control or difficult ground makes continuous casing advantageous.
Explore guide →Chain trenchers cut narrow, consistent trenches using a driven digging chain. They are widely used for utilities, drainage and irrigation where controlled trench width can reduce excavation and backfill volume.
Explore guide →Compaction wheels densify cohesive backfill by pressing shaped feet into the soil while the carrier moves the wheel through a trench or fill area. They use machine weight and repeated kneading action rather than hydraulic...
Explore guide →Excavator-mounted drill masts add a feed beam, drilling head and control system to the excavator boom, allowing the carrier to position a drill accurately on slopes, benches and confined sites where a dedicated drill rig may be less practical.
Explore guide →Drum cutters use hydraulically driven rotating drums fitted with picks to cut rock, concrete, asphalt and other compact material. They are chosen when controlled excavation or profiling is more important than impact breaking.
Explore guide →Compare hydraulic breakers, their applications, mounting requirements and carrier compatibility.
Explore guide →Hydraulic plate compactors use a vibrating base plate to compact suitable fill through an excavator-mounted attachment. They are useful where the boom can position a plate into a trench or other restricted working area. The chosen model must suit the carrier and the project’s required compaction method.
Explore guide →Excavator-mounted hydraulic rock drills turn an excavator into a mobile drilling platform for blast holes, anchors, splitting holes and other hard-rock work. Most production systems combine a hydraulic drifter or rotary-percussive head with a feed mast.
Explore guide →Pile breakers remove excess concrete from cast piles to expose reinforcement and achieve the specified cut-off level. They replace or reduce manual breaking where the pile geometry and site setup suit a mechanised system.
Explore guide →Hydraulic impact pile hammers drive piles by repeatedly applying controlled impact energy through a drive cap or anvil. Excavator-mounted systems can be useful on confined sites and smaller piling work where mobility matters, while larger hammers may use crane or dedicated leader systems.
Explore guide →Post driver attachments install fence, vineyard, orchard and similar posts by impact or vibration while the carrier positions and supports the tool. They can reduce manual handling on repetitive fencing work, but post guidance and carrier setup are critical.
Explore guide →Rock wheels use a hydraulically driven cutting wheel with picks or teeth to create controlled cuts in rock, concrete, asphalt and frozen ground. They are often used for trenching, profiling and precise excavation.
Explore guide →Excavator soil mixers use powered mixing drums or cutting heads to blend soil in place with air, dry binder, slurry or other project-specified treatment media. They are used for ground improvement, remediation and conditioning of soft or difficult material.
Explore guide →Compare trenching buckets, their applications, mounting requirements and carrier compatibility.
Explore guide →Vibratory pile drivers use rotating eccentric masses to generate vibration that helps install or extract sheet piles, tubes and other suitable pile sections. Carrier capacity, clamp design, soil conditions and vibration...
Explore guide →