Compare 4-in-1 bucket functions, carrier compatibility, capacity, hydraulics, cutting edges and alternatives. Includes buying checks and FAQs.
Explore guide →Compare augers, their applications, mounting requirements and carrier compatibility.
Explore guide →Bale grabs use smooth arms or rollers to clamp round or square bales without puncturing them. They are especially useful for wrapped silage where the handling tool must provide enough grip while minimizing damage to the plastic film.
Explore guide →Bale spears use one or more long tines to penetrate and support hay or straw bales. They are mechanically simple, quick to use and widely fitted to tractors, compact loaders, wheel loaders and telehandlers for field, yard and barn handling.
Explore guide →Brush cutters use rotating blades, discs or heavy cutting tools to clear grass, brush, saplings and unmanaged vegetation. They are lighter and more direct than forestry mulchers when the job is primarily cutting rather than...
Explore guide →Chain trenchers cut narrow, consistent trenches using a driven digging chain. They are widely used for utilities, drainage and irrigation where controlled trench width can reduce excavation and backfill volume.
Explore guide →Cold planers and road planers mill asphalt or concrete surfaces with a rotating drum. Compact attachment-mounted planers are used for patch preparation, level correction, utility work and removal around confined areas.
Explore guide →Crusher buckets process suitable demolition material, rock or aggregate directly on the carrier. They can reduce transport and rehandling where on-site material can be crushed to a useful size.
Explore guide →Compare flail mower types, hydraulic flow, knives and hammers, carrier compatibility, cutting capacity, safety, maintenance and buying checks.
Explore guide →Forestry mulchers shred woody vegetation with a powered rotor. The appropriate head depends on the material, ground contact, desired finish and the continuous power available from its carrier.
Explore guide →Grapple buckets combine a solid loader bucket with one or more hydraulic top clamps. They scoop loose material like a bucket while the grapple arms secure brush, logs, rocks and demolition debris that would otherwise roll or spill.
Explore guide →High-tip buckets add a secondary hydraulic tipping frame so material can be discharged higher or farther forward than with the carrier bucket linkage alone. They are used to load high-sided trucks, hoppers and containers with light or moderate-density bulk material.
Explore guide →Land levelers, often called land planes, are simple grading attachments that shave high spots and redistribute loose material into low areas. They are widely used on gravel drives, yards, arenas and prepared sites where a smooth surface is needed without powered moving parts.
Explore guide →Pallet forks support unit loads from underneath. The practical handling limit depends on the fork frame, tines, pickup, load centre and carrier configuration as a complete system.
Explore guide →Post driver attachments install fence, vineyard, orchard and similar posts by impact or vibration while the carrier positions and supports the tool. They can reduce manual handling on repetitive fencing work, but post guidance and carrier setup are critical.
Explore guide →Root rakes use spaced heavy tines to pull roots, brush and rocks from soil while allowing finer material to fall through. They are used for land clearing, cleanup and rough grading before more precise finishing tools are brought in.
Explore guide →Rotary tiller attachments use powered tines to break, loosen and mix the upper soil layer for landscaping, seedbed preparation and site finishing. Hydraulic versions are common on skid steers and compact track loaders, while PTO-driven tillers are common on tractors.
Explore guide →Salt and sand spreaders distribute de-icing or traction material over roads, yards and paths. Accurate rate control matters because excessive material increases cost and environmental load while insufficient coverage reduces...
Explore guide →Snow blowers collect snow with an auger or cutting drum and discharge it through a chute. They are useful when snow must be moved beyond the immediate edge of a road, yard or path instead of simply pushed aside.
Explore guide →Compare snow plow attachment types, effective width, carrier matching, cutting edges, trip systems, hydraulics, route planning and maintenance.
Explore guide →Snow pushers use a wide box or containment blade to move snow straight ahead across yards, parking areas, roads and industrial sites. Side plates help retain the snow instead of continuously windrowing it to one side.
Explore guide →Stump grinders use a rotating cutting wheel or disc with replaceable teeth to reduce tree stumps below ground level. Carrier-mounted grinders extend this work to excavators, compact loaders and tractors.
Explore guide →Sweeper and broom attachments remove loose debris from hard surfaces. An angle broom moves material across or to the side of the route, while a pickup sweeper collects it for disposal. Choose the operating principle before comparing working width or carrier size.
Explore guide →Tree pullers use narrow, high-grip jaws to clamp small trees, shrubs, posts or saplings so the carrier can pull them from the ground. They can remove part of the root system with the stem, reducing the stump left for later cleanup.
Explore guide →Tree spades use several curved or angled blades to cut a root ball around a tree for transplanting. The attachment must match tree size, soil condition, desired root-ball geometry and the lifting capability of the carrier after the root ball is formed.
Explore guide →