About Wimmer International
Wimmer International represents Austria in the attachment sector with specialized excavator attachments for rock, demolition, drilling, tunnelling and severe construction work. Typical carrier groups include excavators, while common use cases include excavation and digging, demolition and deconstruction, and drilling, trenching and foundations. The right model depends on more than nominal machine weight: interface dimensions, installed mass, hydraulic capacity and the material being handled all matter.
What does Wimmer International manufacture?
The Wimmer International portfolio includes Buckets, Quick Couplers, Grapples, Demolition Tools, Hydraulic Breakers, Augers, Drum Cutters, and Crushers, giving it a footprint in earthmoving, demolition, and drilling & trenching. Product families should be compared independently: a bucket or fork is selected mainly around geometry and load, while powered tools add oil-flow, pressure, return-line and sometimes electrical-control considerations.
Wimmer International product families include Buckets, Quick Couplers, Grapples, Demolition Tools, Hydraulic Breakers, Augers, Drum Cutters, and Crushers. The exact model range can change by market, so current dimensions, weights, carrier recommendations and options should be checked against the manufacturer’s latest documentation before an attachment is specified.
Product range in context
Wimmer International equipment is relevant to excavation and digging, demolition and deconstruction, and drilling, trenching and foundations. These applications can place very different loads on the carrier and attachment. A tool used for intermittent site work may need a different wear package, capacity or hydraulic configuration from one used continuously in quarry, demolition, forestry, recycling or municipal service.
| Product area | Typical role | Key specification checks |
|---|---|---|
| Buckets | Digging, loading, grading or handling material. | Width, volume, cutting edge or teeth, attachment mass and coupler interface. |
| Quick Couplers | Changing attachments without removing mounting pins manually. | Pin dimensions or interface standard, locking principle, safety provisions and attachment geometry. |
| Grapples | Sorting, gripping and handling loose or irregular material. | Opening, jaw geometry, capacity, service weight, rotation and hydraulic functions. |
| Demolition Tools | Primary or secondary demolition work. | Carrier weight, attachment mass, jaw geometry, hydraulic demand and working reach. |
| Hydraulic Breakers | Breaking concrete, rock and other hard material. | Carrier class, service weight, required oil flow, operating pressure, tool diameter and bracket. |
| Augers | Drilling holes for posts, foundations and ground works. | Drive torque, auger diameter and length, oil flow, pressure and mounting frame. |
Choosing Wimmer International equipment
Compatibility for Wimmer International tools should be verified at model level. Carrier class is only the first filter: mounting geometry, hydraulic capacity, hose layout, attachment mass, centre of gravity and the work cycle can all change suitability. Where a coupler or adapter is added, include its height and weight in the calculation rather than assessing the work tool in isolation.
Where Wimmer International products fit
For Wimmer International, the useful comparison is the complete working system rather than the attachment in isolation. Machine size, coupler, hydraulic circuits, hoses, controls, operator visibility and the material being handled determine whether a particular configuration is practical.
- Excavation And Digging: For excavation work, bucket or tool geometry, penetration, cutting-edge configuration and machine breakout force influence productivity as much as nominal capacity.
- Demolition And Deconstruction: Demolition work places high shock and side loads on both tool and carrier, so attachment weight, hydraulic protection, jaw or tool geometry and wear parts deserve close attention.
- Drilling, Trenching And Foundations: Drilling and trenching tools must be matched to ground conditions as well as torque, flow, pressure, tool diameter or chain specification and desired depth.
Compatibility and installation checks
Before installing Wimmer International equipment, verify the attachment plate or pin dimensions and make sure the carrier has the required hydraulic services. Confirm that hoses can move through the full working envelope without being stretched, pinched or exposed to excessive abrasion. For rotating, tilting, opening or powered attachments, count the independent hydraulic functions and check whether the machine needs extra lines, valves or an electrical control connection. The final combination should stay within the carrier manufacturer’s permitted attachment and lifting limits.
Explore related attachment topics
Buckets · Grapples · Demolition Tools · Hydraulic Breakers · Augers
Official sources
For Wimmer International, use current manufacturer documentation to confirm exact model availability, carrier ranges, dimensions, hydraulic requirements, options and regional support.