About Green Attachments
Green Attachments Oy is a Finnish supplier and manufacturer focused on hydraulic attachments for demolition, recycling, earthmoving and foundation-related work. The range covers compact carriers through larger excavators and combines primary demolition tools with complementary products such as augers and compacting plates.
What does Green Attachments manufacture?
- Hydraulic breakers for a broad range of excavator sizes
- Concrete pulverizers and crushers for demolition and secondary processing
- Scrap and demolition shears
- Sorting and demolition grapples
- Hydraulic augers and drilling tools
- Hydraulic compactor plates for trenches and ground work
Machines and applications
Most of the range is designed around excavators and mini excavators. The wide span of tool types means hydraulic specification is especially important: a breaker, shear, rotating pulverizer and auger can require different flow, pressure, drain-line and control arrangements even on the same carrier.
Choosing Green Attachments equipment
Start with carrier weight and hydraulic capacity, then check tool weight, recommended flow and pressure, rotation circuit, case-drain requirements and coupler interface. For demolition tools, compare jaw opening, tip force and cutting geometry against the actual concrete, reinforcement or scrap section rather than choosing only by excavator tonnage.
Product range in context
The Green Attachments attachment range includes hydraulic breakers, pulverizers, shears, grapples, augers, and hydraulic compactors. Typical applications include demolition and deconstruction, scrap, waste and recycling, drilling, trenching and foundations, and compaction and ground improvement. Compatibility depends on the exact attachment model, carrier size, mounting interface, hydraulic system and intended duty cycle. Compare the relevant product family first, then verify model-specific dimensions, weight, oil flow, operating pressure and control requirements for the machine and job.
What to compare within the Green Attachments range
Within the Green Attachments range, specifications differ by product family. Compare the main dimensions, carrier requirements, hydraulic demands and working limits shown below before treating two models as direct alternatives.
| Product area | Typical role | Key specification checks |
|---|---|---|
| Hydraulic breakers | Breaking concrete, rock and other hard material. | Carrier class, breaker service weight, oil flow, operating pressure, tool size and mounting bracket. |
| Pulverizers | Secondary concrete demolition and recycling. | Service weight, jaw opening, crushing force, tooth plates, rebar handling and hydraulic demand. |
| Shears | Cutting structural steel and scrap. | Service weight, jaw opening, blade configuration, cutting capacity, hydraulic demand and carrier stability. |
| Grapples | Sorting, loading and material handling. | Jaw geometry, opening, volume, rotator interface, service weight and hydraulic functions. |
| Augers | Drilling holes for posts, foundations or landscaping. | Drive size, auger diameter and length, torque demand, oil flow and pressure. |
| Hydraulic compactors | Ground and trench compaction. | Plate size, service weight, hydraulic flow and pressure, vibration system and mounting interface. |
Where Green Attachments products fit
Green Attachments equipment can be configured differently depending on the job. Application-specific geometry, wear protection, hydraulic demand, working reach and carrier balance should be considered alongside the headline attachment type.
- Demolition & deconstruction: tool weight, carrier stability, hydraulic service, working reach and wear-part access matter as much as headline cutting or breaking capability.
- Scrap, waste & recycling: material density, wear resistance, cycle time, gripping or cutting geometry and rotation requirements are key comparison points.
- Drilling, trenching & foundations: required depth, diameter or trench width, ground conditions, torque or cutting power and spoil handling should be defined before model selection.
- Compaction & ground improvement: plate size, hydraulic supply, trench access, carrier reach and soil conditions affect the right setup.
Compatibility and installation checks
For Green Attachments products, relevant carrier types include excavators and mini excavators. A technically compatible attachment still needs to fit the machine, coupler and hydraulic system as a complete installed package. Compare mounting dimensions, operating weight, hydraulic flow and pressure, hose routing and any required electrical or control interfaces before ordering.
- Carrier operating weight and the carrier manufacturer’s permitted attachment mass.
- Available hydraulic flow, working pressure, return-line requirements and the number of auxiliary circuits.
- Overall attachment height, working envelope, transport dimensions and hose routing.
Service, wear parts and ownership
Purchase price is only one part of attachment cost. When evaluating Green Attachments, check access to pins, bushings, cutting edges, teeth, tines and other mechanical wear points, cutting, crushing or drilling wear parts and the time required to replace them, and service intervals, bushes, brushes, vibration components or other duty-specific consumables. Also compare parts availability, service documentation, dealer support and the practicality of carrying critical wear items on site. For high-hour attachments, small differences in maintenance access and parts lead time can matter more than a minor difference in initial price.
Explore related attachment topics
Official sources
For Green Attachments, use current technical documentation, manuals and authorised dealer information to confirm model availability and exact carrier compatibility before ordering.