About Gjerstad
Gjerstad is a Norwegian attachment brand with roots in a mechanical workshop founded in 1964 to build and improve construction buckets. Today the Gjerstad brand is operated by CEG Norway AS within Construction Equipment Group. The company history states that most excavation and wheel-loader equipment is again manufactured in Scandinavia after overseas production was discontinued in 2015.
What does Gjerstad manufacture?
- Excavator buckets including digging, cable, grading, hydraulic grading and skeleton designs
- Quick couplers and attachment interfaces
- Sorting and combination grapples
- Rippers and special earthmoving tools
- Wheel-loader buckets, pallet forks and material-handling equipment
- Snow blades and other seasonal tools
Machines and applications
The product range is built mainly around excavators and wheel loaders and extends into backhoe-loader and contractor applications. Because the range includes both digging tools and lifting/handling equipment, load chart and lifting-point requirements should be checked separately from digging compatibility.
Company and brand structure
Gjerstad is presented as a manufacturer brand operated by CEG Norway AS, not as an unrelated company separate from the CEG structure.
Choosing Gjerstad equipment
Confirm machine model, coupler standard, bucket or tool width, weight and capacity. For grapples and hydraulic grading tools, verify auxiliary hydraulic circuits and hose connections. For forks and lifting equipment, use the machine’s rated lifting or tipping capacity rather than bucket capacity as the limiting value.
Product range in context
The Gjerstad attachment range includes buckets, quick couplers, grapples, pallet forks, snow plows, sweepers, and rippers. Typical applications include excavation and digging, grading and site preparation, material handling and lifting, and snow and ice management. Compatibility depends on the exact attachment model, carrier size, mounting interface, hydraulic system and intended duty cycle. Compare the relevant product family first, then verify model-specific dimensions, weight, oil flow, operating pressure and control requirements for the machine and job.
What to compare within the Gjerstad range
Within the Gjerstad range, specifications differ by product family. Compare the main dimensions, carrier requirements, hydraulic demands and working limits shown below before treating two models as direct alternatives.
| Product area | Typical role | Key specification checks |
|---|---|---|
| Buckets | Digging, loading, grading or material handling. | Bucket width, volume, cutting edge or teeth, coupler interface and attachment mass. |
| Quick couplers | Rapid and repeatable tool changes. | Pin dimensions or coupler standard, locking method, safety features, attachment geometry and hydraulic connections. |
| Grapples | Sorting, loading and material handling. | Jaw geometry, opening, volume, rotator interface, service weight and hydraulic functions. |
| Pallet forks | Handling pallets and unit loads. | Rated capacity, tine length, load centre, frame width and coupler interface. |
| Snow plows | Snow clearing on roads, yards and sites. | Blade width, sectional or trip-edge design, angling functions, mounting interface and road conditions. |
| Sweepers | Road, yard and site cleaning. | Brush width and diameter, hydraulic flow, collection method, side-shift or angle functions and carrier interface. |
Where Gjerstad products fit
Gjerstad equipment can be configured differently depending on the job. Application-specific geometry, wear protection, hydraulic demand, working reach and carrier balance should be considered alongside the headline attachment type.
- Excavation & digging: bucket or tool geometry, breakout requirements, coupler dimensions and machine balance should be matched to the material and trench or loading task.
- Grading & site preparation: working width, controllability, visibility, attachment height and fine movement influence accuracy and productivity.
- Material handling & lifting: rated loads, load centre, gripping geometry, rotation and the carrier lifting chart must be checked together.
- Snow & ice management: working width, blade or brush design, road speed, hydraulic functions and mounting system determine the operating setup.
Compatibility and installation checks
For Gjerstad products, relevant carrier types include excavators, wheel loaders, and backhoe loaders. A technically compatible attachment still needs to fit the machine, coupler and hydraulic system as a complete installed package. Compare mounting dimensions, operating weight, hydraulic flow and pressure, hose routing and any required electrical or control interfaces before ordering.
- Carrier operating weight and the carrier manufacturer’s permitted attachment mass.
- Available hydraulic flow, working pressure, return-line requirements and the number of auxiliary circuits.
- Pin dimensions, coupler standard, mounting geometry and any required adapter or bracket.
- Control-system, electrical or sensor compatibility where the attachment uses integrated functions.
- Overall attachment height, working envelope, transport dimensions and hose routing.
Service, wear parts and ownership
Purchase price is only one part of attachment cost. When evaluating Gjerstad, check access to pins, bushings, cutting edges, teeth, tines and other mechanical wear points and service intervals, bushes, brushes, vibration components or other duty-specific consumables. Also compare parts availability, service documentation, dealer support and the practicality of carrying critical wear items on site. For high-hour attachments, small differences in maintenance access and parts lead time can matter more than a minor difference in initial price.
Explore related attachment topics
Official sources
For Gjerstad, use current technical documentation, manuals and authorised dealer information to confirm model availability and exact carrier compatibility before ordering.