About Holp
Holp GmbH is based in Murrhardt-Fornsbach, Germany. Its attachment portfolio includes equipment for excavators and forestry applications, with an emphasis on rotation and specialist bucket designs.
What does Holp manufacture?
The range includes RotoTop rotary drives, RotoX tiltrotators and bucket families such as MultiGrip, ProfilLöffel, VarioLöffel and BankettLöffel.
Selected product groups
| Product group | Overview | Official information |
|---|---|---|
| RotoTop | Continuous rotation for excavator tools, without a built-in tilt function. | View range â |
| RotoX | Tiltrotator using a cylinder-free tilt design. | View range â |
| MultiGrip | Bucket incorporating a counter-hold arrangement for gripping material. | View range â |
| Specialist buckets | ProfilLöffel, VarioLöffel and BankettLöffel bucket families. | View range â |
Choosing a configuration
RotoTop and RotoX serve different positioning requirements. Compare rotation-only and combined tilt-and-rotation configurations against the actual work and available carrier capacity.
Before selecting a Holp configuration, confirm the exact carrier, mounting interfaces, installed weight, hydraulic requirements and control functions with the manufacturer or supplier.
Product range in context
The Holp attachment range includes hydraulic rotators, tiltrotators, and buckets. Typical applications include drilling, trenching and foundations, excavation and digging, forestry and tree care, grading and site preparation, material handling and lifting, and scrap, waste and recycling. Compatibility depends on the exact attachment model, carrier size, mounting interface, hydraulic system and intended duty cycle. Compare the relevant product family first, then verify model-specific dimensions, weight, oil flow, operating pressure and control requirements for the machine and job.
What to compare within the Holp range
Within the Holp range, specifications differ by product family. Compare the main dimensions, carrier requirements, hydraulic demands and working limits shown below before treating two models as direct alternatives.
| Product area | Typical role | Key specification checks |
|---|---|---|
| Hydraulic rotators | Continuous rotation of grapples and handling tools. | Lifting load, torque, axial and radial loads, mounting pattern, ports and through-channels. |
| Tiltrotators | Combining continuous rotation with tilting for excavator tools. | Machine weight class, coupler standard, control system, hydraulic installation, tilt range and total installed weight. |
| Buckets | Digging, loading, grading or material handling. | Bucket width, volume, cutting edge or teeth, coupler interface and attachment mass. |
Where Holp products fit
Application context matters for Holp equipment because the same attachment category can be configured very differently for different jobs. Other applications can place different demands on geometry, wear protection, hydraulic capacity, cycle time and carrier stability, so the intended duty should be defined before selecting a model.
- Drilling, trenching & foundations: required depth, diameter or trench width, ground conditions, torque or cutting power and spoil handling should be defined before model selection.
- Excavation & digging: bucket or tool geometry, breakout requirements, coupler dimensions and machine balance should be matched to the material and trench or loading task.
- Forestry & tree care: tree size, cutting or gripping capacity, rotation, hose routing and the carrier hydraulic system determine practical suitability.
- Grading & site preparation: working width, controllability, visibility, attachment height and fine movement influence accuracy and productivity.